Standing Floor Air Purifier SAP 2000


img_2000f_2bAll metal built with comprehensive function

The all metal housing SAP2000 unit is an electronic air purifier with very powerful air cleaning capability.

The all metal housing SAP2000 is a reliable electronic air purifier features multi-stage air purification process, including 2 washable and reusable 2-stage electronic cells, activated carbon filter and UV-photo catalytic system that eliminates particles, toxic gases and various microorganisms in the air.

The power supply of the unit is self-regulating to maintain peak efficiency to accommodate a wide range of cell dirt loading conditions.

The product is ideal for commercial, medical or industrial environment because it offers complete protection and does not generate any chemical odors by utilizing none chemical substances nor plastic materials.


img_2000f_3Dual big size two-stage electronic cells

The unit utilizes 2 pieces of big size two-stage electronic cells and it greatly increases the capability of capturing the fine particles. The cells are washable and reusable and save the cost comparing with disposable air filters.



Perfect CHECK alarm system

The unit equips with 2 programmable power supplies. They constantly monitor the working status of the electronic cell and the unit CHECK light will beep and flash when there is a problem.



Powerful UV light-photo catalytic system

The unit uses 2x24W UV bulbs to kill the microorganisms immediately and decompose many kinds of organic compounds by photo catalytic filter.

Product description

  • The washable metal mesh pre-filter captures large particles to contribute the other filters longer filter lifetime.
  • The electronic cell discloses a negative charge to particles that pass through the unit and collects them on opposite charged metal plates. The electronic cell can capture particles down to a size of 0.01 micron. It is easy to clean and need low maintenance.
  • The activated carbon filter locks in chemicals and odors. It will continue working for many months before replacement.
  • UV-C light can destroy airborne microorganisms such as bacteria, mold, and viruses.
  • Photo catalyst can effectively reduce odors and restrain the activity of microorganisms. The use of photo catalyst is permanent and does not need replacement.
  • The negative ion generator releases the high concentration level of negative ions to make the air more pure and fresh.


Control Panel



  1. CHECK/FILTER REPLACEMENT indicator light: When the machine breaks down, the indicator light flashes red with beeping. When the indicator light flashes yellow, the activated carbon filter needs to be replaced.
  2. AIR POLLUTANT indicator light
  3. TIMER indicator light
  4. SPEED indicator light
  5. Auto mode indicator light: When this indicator is lighting up, the unit is at Auto mode.
  6. NIGHT indicator light: When the NIGHT button on the remote control is pressed the light will light up.
  7. NEG.ION indicator light
  8. UV LAMPS indicator light: The indicator light will light up when the UV light are on. When the indicator light flashes, it tells the time for UV lamp replacement.


  • A- POWER Button
  • Turns the purifier On and Off.
  • B- SPEED Button
  • When the SPEED button is pressed the airflow rate changes as show below: L -- M -- H -- a (auto mode).
  • C- TIMER Button
  • Press the TIMER button to select the time for operation. The timer setting switches as shown: c (timer cycle function) -- 1hr -- 2hr -- 4hr -- cancel timing.
  • D- NEG.ION Button
  • When pressed, the generation of ions will cease and the negative ion generator light will go out.
  • E- UV LAMP Button
  • When the button is pressed, it will turn off the UV lamp, pressing again will turn on the UV light.

Easy and low cost maintenance

When the filters needs to be washed or replaced, just open the front panel, lift out the old filters and drop the new ones in. No tools are required.Unplug the unit.

  • Open the filter cabinet and pull straight the pre filter. Clean the metal mesh pre filter by using a vacuum cleaner or rinse it. Dry the pre filter thoroughly before placing back into the unit.
  • Take out the electronic cell from the filter cabinet. Cleaning the cell in the dishwasher or submerge it in the sink or bathtub. Dry the cell completely before putting back into the cabinet.
  • Replace the carbon filter when the replace filter indicator light flashes.
  • Replace the UV lamp when the UV lamp indicator light flashes.





Model SAP 2000
Power requirement a.c220V, 50Hz
Rated Power Max. 420W
Motor 220V, 50Hz
Noise Level <55dB (A)
Negative Ion 3x10/cm3
UV Lamp 4x24W
Fuse a.c250V, 2A
Main parts Pre filter, electronic cell, activated carbon filter,
UV lamp and photo catalyst, negative ion generator
Dimensions W525mm x D477mm x H1545mm
Weight 112kg
Speed 3 Speeds
Timer 1 hr, 2 hr, 4 hr
Timer cycle mode Automatically stops 2 hours after 2 hours running, circulation in turn.
Auto mode The fan speed is automatically switched depending on the amount of pollution in the air.
Alarm light The indicator lights for cell cleaning, activated carbon filter replacement and UV lamp replacement.
Power cord 3 phase power cord, L=3m
Operation Button operation, remote control operation

Open chat
Technical Support
Powered by