Portable Air Purifier PAP-200


img_jx600_2Ultra-thin & super quiet

The unit features ultra-thin and quietness. Ultra-thin distinctive, trendy design offers a space-friendly unit and it fits well with your home decor. The unit is portable from room to room and also can be wall-mounted.

The advanced touch-button-control solution makes operation simple and fun, the full function remote control brings even more convenient to operate the unit. Odor and particulate sensor can detect all pollution in the air and control the fan speed of the unit.


HEPA and activated carbon filter

The HEPA filter can capture 99 percent of particles down to 0.3 micron. The high quality activated carbon filter can remove odor in the air while passing through the unit.



Ultra-thin design with slim body

The conventional air purifiers use the centrifugal fan system with thick body and relatively small and thin air filters. JX600 uses DC fan system with high performance and make the machine ultra-thin design. The thickness is just 14.3cm.


img_jx600_5Super quiet with low energy consumption

The unit achieves its incredible quietness through its unique structure design. Unimpeded air flow is simple and direct and avoids air drag, inefficiency and noise associated with more convoluted systems.


Product description

  1. Washable pre filter remove large particles to extend the life of the HEPA filter.
  2. The HEPA filter is able to capture 99% of airborne particles down to size of 0.3 microns.
  3. Activated carbon filter can absorb odors, toxic gases in the air.
  4. UV-Photo catalyst kills microorganisms in the air and effectively decomposes organic compounds.
  5. The negative ion generator releases the high concentration level of negative ions and it not only improves the adsorption capability of HEPA but also makes more pure and fresh clean air.

img_jx600_6HEPA filter

HEPA stands for High Efficiency Particulate Air (filter). HEPA is a type of highly efficient filtration media that removes microscopic particles in the air that passes through the filter. The most efficient HEPA filter removes 99.7% of particles with size of 0.3 microns that enters the filter. Such particles include tobacco smoke, household dust, and pollen etc.

HEPA filters are composed of a mat of randomly arranged fibres. The fibres are typically composed of fibreglass and possess diameters between 0.5 and 2.0 micrometers. Key factors affecting function are fibre diameter, filter thickness, and face velocity. The air space between HEPA filter fibres is much greater than 0.3 microns. The common assumption that a HEPA filter acts like a sieve where particles smaller than the largest opening can pass through is incorrect. Unlike membrane filters at this pore size, where particles as wide as the largest opening or distance between fibres cannot pass in between them at all, HEPA filters are designed to target much smaller pollutants and particles by its adsorption capability. It is important to note that HEPA filters are designed to arrest very fine particles effectively, but they do not filter out gasses and odor molecules.


Control Panelimg_jx600_8


POWER indicator light: Connect the power, the indicator lighting up white. After start the machine, light is normally on.

  1. SPEED indicator light
  2. Auto mode indicator light: When this indicator is lighting up, the unit is at Auto mode.
  3. TIMER indicator light
  4. TIMER CYCLE indicator light: When this indicator is lighting up, the unit will start to work for 2 hours and stops 30 min. automatically, circulation in turn.
  5. LOCK buttons indicator light: When this indicator light illuminates all the buttons will be locked.
  6. UV LAMP indicator light: When the indicator light flashes, it tells the time for UV lamp replacement.
  7. NEG.ION indicator light
  8. CLEAN PRE-FILTER indicator light
  9. HEPA FILTER LIFE indicator light
  10. ACTIVATED CARBON FILER LIFE indicator light


  • POWER Button
  • Turns the purifier On and Off
  • SPEED Button
  • When the SPEED button is pressed the airflow rate changes as show below: L (speed 1) -- M (speed 2) -- H (speed 3) -- L/M (speed 4) -- L/M/H (speed 5) -- A (Auto mode).
  • TIMER Button
  • Press the TIMER button to select the time for operation. The timer setting switches as shown below: 1hr -- 2hr -- 4hr -- C (timer cycle function) -- cancel timing.
  • UV LAMP Button
  • When the button is pressed, it will turn on the UV lamp, pressing again will turn off the UV light.
  • NEG.ION Button
  • When pressed, the generation of ions will cease and the negative ion generator light will go out.

Easy maintenance

When the filters needs to be washed or replaced, just open the front panel, lift out the old filters and drop the new ones in. No tools are required.Pull straight the pre filter from the back of the unit. It can be used repeatedly after cleaning.Unplug the unit.

  1. Pull straight the pre filter from the back of the unit. Thoroughly rinse the pre filter and let it air dry before placing it back in the unit. Do not use heated or compressed air as part of the drying process.
  2. Replace the carbon filter when the repace carbon filter indicator light flashes.
  3. Replace the HEPA filter when the repace HEPA filter indicator light flashes.
  4. Replace the UV lamp when the UV lamp indicator light flashes.





Model PAP200
Power requirement a.c220V, 50Hz
Rated Power Max. 30.2W
Motor DC12V
Noise Level <35dB (A)
Negative Ion 2x3x106/cm3
UV Lamp 6W
Fuse a.c250V, 2A
Main parts Pre filter, electronic cell, UV lamp and photo catalyst, HEPA Filter, Activated Carbon Filter, Negative Ion Generator
Dimensions W415mm x D143mm x H707mm
Weight 8.0kg
Speed 5 Speeds
Timer 1 hr, 2 hr, 4 hr
Timer cycle mode Automatically stops 30 min after 2 hours running, circulation in turn.
Auto mode The machine automatically adjust the speed according to the pollutant concentrations
Alarm light The indicator lights for clean pre filter, UV lamp Replacement, HEPA FilterReplacement, and activated Carbon filter replacement
Power cord 3 phase detachable power cord, L=3m
Operation Button operation, remote control operation

Open chat
Technical Support
Powered by