Ceiling Air Purifier CAP 600

img_600tn_1a

img_600tn_2bNew ceiling-mount type air purifier

The CAP 600 ceiling-mount air purifier is designed to be installed in the ceiling of home and workplace to save space.

The product is based on the electrostatic precipitation principle and it captures airborne pollutants, particles and contaminants as small as 0.01 micron and kills various microorganisms such as bacteria, viruses and fungus. The activated carbon filter eliminates many household odors. The UV-photo catalytic system destroys microorganisms and helps to remove chemical smells. The negative ion generator release high concentration level of negative ions to make the purified air fresh.

The CAP 600 ceiling-mount air purifier is ideal for office, hospital/clinic, and workplace applications where ceiling height from the drop ceiling to the ceiling above is more than 100cm.


img_600tn_3Two stage electronic cell and smart check alarm system

The two-stage electronic cell successfully collects tiny particles down to 0.3 microns. The cell is reusable after cleaning and saves maintenance cost as compared to other types of air cleaning systems. The unit features a smart check alarm system that the unit CHECK light will beep and flash when electronic cell-high voltage system encounters a problem.


img_600tn_4

UV light-photo catalytic system

The unique combination of UV light and photo catalytic system not only massively kills microorganisms but also eliminates many kinds of chemical compounds and toxic gases.

 


img_600tn_5

 

Easy open front panel

The firmly fixed front panel just need slightly pressing the two switches located on the 2 sides of the unit to open and it is an important factor for the maintenance of ceiling-mount air purifiers.

 


Product description

  1. The washable metal mesh pre-filter captures large particles to contribute the other filters longer filter lifetime.
  2. The electronic cell discloses a negative charge to particles that pass through the unit and collects them on opposite charged metal plates. The electronic cell can capture particles down to a size of 0.01 micron. It is easy to clean and need low maintenance.
  3. The activated carbon filter locks in chemicals and odors.
  4. UV-C light can destroy airborne microorganisms such as bacteria, mold, and viruses.
  5. Photo catalyst can effectively reduce odors and restrain the activity of microorganisms. The use of photo catalyst is permanent and not need replacement.
  6. The negative ion generator releases the high concentration level of negative ions to make the air more pure and fresh.

img_600tn_6Activated Carbon Filter

Activated carbon, also called activated charcoal, is composed of specially treated charcoal. When charcoal is oxygenated at a certain pressure, hundreds of thousands of pores forms on its surface. The pores on the surface area are available for adsorption of odors or toxic gases etc. Due to its huge amount of micro porosity, just one gram of activated carbon has a surface area in excess of 500m2, as determined by gas adsorption. The walls of the pores provide the surface layer essential for molecules adsorption.

Activated carbon acts like a sponge to absorb many types of gas and odor. Some examples of chemicals and compounds that can be removed by a carbon filter are: many VOC, benzene, cigarette smoke odors etc. The amount of activated carbon in a filter is one of the most important factors affecting the filter pollutant removal amount and rate. The more carbon material in the filter the more efficient the filter be. When the pores on the carbon surface get filled up with pollutant the filter become clogged and loose its efficiency.

img_600tn_7

Control Panelimg_600tn_8

 

  1. NEG.ION indicator light
  2. UV LAMP indicator light
  3. AUOT MODE indicator light: When this indicator is lighting up, the unit is at Auto mode.
  4. CELL CLEAN DRY FUNCTION indicator light: When this indicator is lighting up, the electronic cell does not charge for 2 hours allowing time to dry the cell.
  5. TIMER CYCLE MODE indicator light: In this case the unit will start to work 2 hours and stops 2 hours automatically.
  6. TIMER indicator light: The timer setting switches as shown:1hr -- 1hr ------ 12hr -- c (timer cycle function)-- Cancel.
  7. SPEED indicator light
  8. REPLACE ACTIVATED CARBON FILER LIFE indicator light
  9. CLEAN ELECTRONIC CELL indicator light
  10. CHECK indicator light: When the machine breaks down, the indicator light flashes red with beeping.
  11. REPLACE UL LAMPS indicator light

Easy and low cost maintenance

When the filters needs to be washed or replaced, just open the front panel, lift out the old filters and drop the new ones in. No tools are required.Unplug the unit.

  1. Open the filter cabinet and pull straight the pre filter. Clean the metal mesh pre filter by using a vacuum cleaner or rinse it. Dry the pre filter thoroughly before placing back into the unit.
  2. Once the cell plates become covered, their efficiency starts to diminish. It is necessary to clean the cell regularly. Take out the electronic cell from the filter cabinet. Cleaning the cell in the dishwasher or submerge it in the sink or bathtub. Dry the cell completely before putting back into the cabinet.
  3. Replace the carbon filter when the repace carbon filter indicator light flashes.
  4. Replace the UV lamp when the replace UV lamps indicator light flashes.

img_600tn_9

img_600tn_10

img_600tn_11

Specifications

Model CAP 600
Power requirement a.c220V, 50Hz
Rated Power Max. 96W
Motor 220V, 50Hz
Noise Level <45dB (A)
Negative Ion 3x10/cm3
UV Lamp 2x6W
Fuse a.c250V, 2A
Main parts Pre filter, electronic cell, activated carbon filter,
UV lamp and photo catalyst, negative ion generator
Dimensions W630mm x D630mm x 300mm
Weight 25.05kg
Speed 3 Speeds
Timer 1 hr, 2 hr, 12 hr
Timer cycle mode Automatically stops 2 hours after 2 hours running, circulation in turn.
Auto mode The fan speed is automatically switched depending on the amount of pollution in the air.
Alarm light The indicator lights for cell cleaning, activated carbon filter replacement and UV lamp replacement.
Power cord 3 phase power cord, L=3m
Operation Button operation, remote control operation

 

Open chat
Technical Support
Powered by